As winter rapidly approaches, with all the talk in the news papers of mini-iceages, cold spells and the knowledge that winter generally means rain here in the UK I thought it would be a good time to take a look at a rain cover.
Rain covers for the PMW-F3 are few and far between at the moment, so when Rene at CamRade told me that they were producing a tailored rain cover for the F3 I had to get my hands on one to take a look.
The cover arrived in a nice compact pouch made from the same high quality waterproof fabric as the cover itself. This fabric is some kind of soft rubberised material that feels very tough, yet is very flexible and soft to the touch, which is important if you have the camera up against your face. According to CamRade this soft material helps reduce the noise that rain drops falling on the can camera make. The cover is a tailored loose fit with velcro straps and fastenings that can be used to take up any excessive slack.
There are clear panels on the left side, more about them in minute. There’s an elasticated opening for a gun microphone at the front as well as a velcro protected opening on the right side for cable access to the XLR connectors. This opens up into a small tube so keeps the cable entry well protected from the weather. Along the top of the camera handle there is a long velcro opening to give access to the carry handle and top of the camera. This opening folds over to one side and is secured by a small velcro pad so that should not collect and rain when not in use.
The main clear panel on the left side of the cover can be opened out and expanded so the the F3′s LCD panel can be used in the open position. the clever design allows the LCD to be viewed from above, from in front as well as from the rear, so you can continue to use the LCD panel in the rain. However in practice rain falling on the cover itself will tend to obscure or distort the images on the LCD to some extent. Ahh… the joy of shooting in the rain!!
You can of course use the rear VF if you wish as this sticks out through a hole in the back of the rain cover. The rear of the cover opens up via velcro for easy battery access and will easily accommodate oversize batteries. I think the rear end of this cover is it weakest area and personally I’d like a cover that completely encloses the rear viewfinder, but that’s just me.
Another feature on the left side of the cover is a clear window that allows you to see the lenses focus and iris rings and markings. If your using a long lens the cover comes with a clear extension that attaches to the front of the main cover and makes it long enough to to protect much longer lenses including lenses like the Optimo 16-24 zoom. This extension piece comes with a strip of self adhesive velcro that can be attached to the lens to stop it flapping around in the wind.
On the right side of the cover there is an opening under a flap that allows you to insert your hand into the cover so you can grip the camera via the hand grip without having to open up the rain cover. I really liked this feature. The bottom of the cover has small side flaps that will prevent rain from running off under the camera or onto the very top of your tripod. A nice touch.
I’ve had many small camera rain covers over the years. Very often they are so stiff and ridged that they are a complete nuisance to use. The material used in this cover is really nice and makes the camera reasonably easy to use even when trussed up inside the cover. The fold out clear cover for the LCD means that rain should not prevent you from being able to carry on shooting due to the camera becoming wet.
I give this cover 7/10. It would be 9/10 if the rear end was a little neater and there was a way to cover the EVF, but as small camera rain covers go, it’s a good one.
I was asked by my good friend Rene of Camrade to take a look at some of their new products. So over the next couple of weeks I’ll be looking at the CB Single III camera bag, the PMW F3 rain cover and a new PL lens adapter for the Sony FS100. First I’m going to take a look at the camera bag.
I’ve had Camrade bags before and they have always lasted well, standing up to the knocks and bumps that go along with lugging kit all over the place. I was in the market for a new bag for one of my PMW-F3′s, so I was sent the CB Single III bag. From the outside this is a functional looking bag with a large mesh pocket on one side and further external pockets on the other side and at one end. It has a nice well padded chunky carry strap that is comfortable to use.
The top of the bag opens up with a dual zipper system that gives you completely un hindered access to the bags interior. This is great for run and gun where you may need to quickly grab the camera from the bag and you don’t want to have to squeeze it out through a small opening. The interior of the bag has various dividers that are secured by velcro, so you can customise the layout to suit your needs. One of the dividers forms a clever storage box to one side of the bag. I’ve found this particularly useful with the F3 as I can safely store my Genus 4×4 Matte Box and a couple of DSLR lenses in here.
Then my batteries, other bits and bobs and the rain cover fit comfortably in the end compartments. This bag really works well with the F3 alloying you to get a complete basic shooting kit into one bag without the bag being too big or bulky.
It’s not perhaps the most fancy or sophisticated of bags, but in terms of practicality and functionality it works very well indeed. There is a strap in the main compartment to hold the camera secure if your really going to be bouncing it around. The base and sides of the bag are all semi ridged and have a good layer of shock absorbing foam in them. With one of these bags typically costing a very affordable $200 it really does represent good value for money.
My thanks to Rene for the sample bag. http://www.camrade.com/products-page/video/cambags/cb-single-iii1
In my next post I’ll look at the nice rain cover that Camrade make for the F3.
Most Recent Posts
- Weifeng WF717 Tripod Review, Cheap as chips camera support.
- NEX-FS700 Workshop Helsinki, Finland on 10th of October (Wednesday)
- Maximum Dynamic Range Picture Profile for the NEX-FS700
- NEX-EA50 Review. Great Value For The Money.
- PMW-200 Picture Profile. AC-Asia1
- Sony NEX-EA50 First Tests: Really rather good!
- Litepanels LED lighting Patent Upheld, ITC Bans Import of LED Video Lights In to USA!
- Bangkok, Thailand, FS100 and FS700 workshops. October 3rd 2012
- A to Z Index
- Alister's Bio and Info
- Alister's Blog
- Alister’s Bio and Info
- Alister’s Blog
- Camera Setup
- Contact Me
- Documentary Production Workshops
- Example Video Clips
- How To Videos
- Northern Lights Live 2012
- Once in a Lifetime Northern lights Expeditions to Norway.
- Picture Profile Guide.
- Adaptimax Lens Adapters for PMW-F3
- Alister’s Equipment Reviews A to Z.
- Alphatron EVF-035W Viewfinder Video Review.
- Atomos Samurai
- Camrade cb-single-iii camera bag.
- CamRade WS PMW F3 Rain Cover Review.
- Cineroid HDSDI EVF (EVF-4MSS) review.
- Juice Designs EX1R Baseplate.
- Manfrotto 509 Tripod Head
- NEX-FS700 In Depth Review.
- Review of the Sony PMW-200
- Sonnet QIO Review. Very, Very, Fast Offloads.
- Sonnet SDHC to SxS Camera Adapter.
- Sony FS100 and F3 Video Review
- Sony NEX-EA50 Review.
- Sony PVM-740 OLED monitor
- Tilta BS-TS03 Shoulder Mount Review
- Today3D FIZ controller. Focus, Zoom, Iris, Interaxial.
- Transvideo PMW-F3 replacement base assembly.
- Triad PL to E-Mount adapter.
- TVLogic WFM-056WP Monitor/Viewfinder
- Vinten 100 Tripod Review
- Zunow SWV-E11 11-16mm E-Mount F2.8 Zoom Lens.
- Shooting Tips
- Short Film Workshop
- Tech Notes.
- Tornado Chasing
- Training and Expeditions
- Ultimate Documentary Production Workshop
- Video Reviews
- Workshops and Training