I’m a long time Vinten user. My first true, pro tripod was a Vinten 5 with alloy legs that I purchased in 1989 (I think). 22 years on I still have that tripod and it is still perfectly useable. Since then I’ve been the very happy owner of a fabulous set of Vinten FibreTec legs (still have them, still love them) and a new model Vinten Vision 5AS. All of these have been excellent, reliable and virtually indestructible. I’ve taken them up into the Arctic where it’s been -36c. I’ve taken them to the Arizona desert, into Hurricanes, Sand Storms and all kinds of extreme weather. I’ve even used them stood waist deep in the sea (not really recommended). Anyway, I’m waffling… When I needed a bigger tripod to support my Hurricane 3D rig I obtained a Vinten Vision 100.
The Vision 100 is not a new model, but it has a reputation for being able to take a quite remarkable payload for it’s size. You see the Vision 100 head is not much bigger or heavier than my Vinten 5, yet it can take double the payload (20kg). This means that I can still pack it in to my luggage when I’m travelling without getting crippled by high excess baggage charges.
One of the features that has made it particularly useful for 3D is the digital counterbalance readout that tells you exactly where you are within the heads very generous and continuously adjustable counter balance range. When swapping between the 3D rig and a conventional camera I can simply dial in the numbers that I know give me optimum balance and off I go. One minute I can have a 3D rig with a pair of F3 etc, weighing over 15kg, then after a few turns of the counterbalance knob I can mount just a single F3 weighing only 3kg and the tripod works beautifully well with either payload. The continuously adjustable drag adjustments for pan and tilt are easy to set and if you want you can get a lot of drag. I find this very useful when shooting air shows with long lenses as I like to have quite a bit of drag to work against to keep things smooth. The smoothness of this head is lovely with no sudden slips or tight spots, it’s a pleasure to use.
The legs I have been using with the Vision 100 head are the Vinten 3 stage carbon fibre Pozi-Loc legs. Even though these are nice and light, they are remarkably stiff. I also have one of Vinten’s clever Spread Loc mid level spreaders. I first got one of these with my FibreTec legs and I’ve never looked back. You can lock the spreader at almost any spread position with a quick turn of the single locking knob. If you need to get the legs down low there is a little button on each arm of the spreader that allows the arm to extend to up to twice it’s original length. The end result is the ability to get very low, even when using standard legs.
Tripods are pretty boring things really. Not as glamourous as a camera, but an essential piece of kit anyway. Get the right tripod and it will last you many, many years, almost certainly out lasting those glamourous cameras. All the Vintens I have owned have been superb. The Vinten 100 is a solid, well made piece of kit that I don’t even really think about when I’m using it. And that is after all what you want, gear that just gets on with its job.
2 Comments to Vinten Vision 100 Long Term Review.
Leave a Reply
Most Recent Posts
- Official European List Pricing for the F5/F55 released, very attractive!
- Why it’s almost impossible to have true Par-Focal zooms on the cheaper 35mm camcorders.
- PMW-200 Firmware V1.1 Update. Helps Fix Back Focus Issues.
- Strokkur: An Icelandic Geyser in Super Slow Motion.
- Workshops in New York and Austin, Texas.
- Raw is raw, but not all raw is created equal.
- Sony F5 and F55 pricing released, by mistake!
- My Horizon Factual Short Film Contest. 1st Prize: Sony NXCAM Camcorder!
- A to Z Index
- Alister's Bio and Info
- Alister's Blog
- Alister’s Bio and Info
- Alister’s Blog
- Camera Setup
- Contact Me
- Documentary Production Workshops
- Example Video Clips
- Film Competition
- How To Videos
- Northern Lights Live 2012
- Once in a Lifetime Northern lights Expeditions to Norway.
- Picture Profile Guide.
- Adaptimax Lens Adapters for PMW-F3
- Alister’s Equipment Reviews A to Z.
- Alphatron EVF-035W Viewfinder Video Review.
- Atomos Samurai
- Camrade cb-single-iii camera bag.
- CamRade WS PMW F3 Rain Cover Review.
- Cineroid HDSDI EVF (EVF-4MSS) review.
- Juice Designs EX1R Baseplate.
- Manfrotto 509 Tripod Head
- NEX-FS700 In Depth Review.
- Review of the Sony PMW-200
- Sonnet QIO Review. Very, Very, Fast Offloads.
- Sonnet SDHC to SxS Camera Adapter.
- Sony FS100 and F3 Video Review
- Sony NEX-EA50 Review.
- Sony PVM-740 OLED monitor
- Tilta BS-TS03 Shoulder Mount Review
- Today3D FIZ controller. Focus, Zoom, Iris, Interaxial.
- Transvideo PMW-F3 replacement base assembly.
- Triad PL to E-Mount adapter.
- TVLogic WFM-056WP Monitor/Viewfinder
- Vinten 100 Tripod Review
- Zunow SWV-E11 11-16mm E-Mount F2.8 Zoom Lens.
- Shooting Tips
- Short Film Workshop
- Tech Notes.
- Tornado Chasing
- Training and Expeditions
- Ultimate Documentary Production Workshop
- Video Reviews
- Workshops and Training
- alisterchapman on NEX-FS700 In Depth Review.
- alisterchapman on Uncompressed 240 fps possible with FS700 and Convergent Design Gemini. Tested!
- alisterchapman on Vinten Vision 100 Long Term Review.
- alisterchapman on Strokkur: An Icelandic Geyser in Super Slow Motion.
- alisterchapman on EX1 and EX3 Picture Profiles.